Description
Product introduction:
Model: SKC-1300
Name: Throttling device
Manufacturer: Shanghai Automation Instrumentation Co., Ltd.
Application: SKC-1300 Elliptical gear flow meter (also known as displacement meter, gear flow meter) is a kind of volumetric flowmeter, which is a kind of high precision in flow meter. It USES mechanical measuring element to divide fluid continuously into the volume of a single known part, according to the measuring room of successive, repeatedly and the frequency of discharge of the volume of fluid to measure the total traffic volume. Oval gear flowmeter can choose different materials (cast iron, cast steel, 304 stainless steel, 316 stainless steel), suitable for chemical, oil, medicine, electric power, metallurgy and food industries of work flow metering.
According to the requirements of the correct installation of the ellipse gear flow meter [4], it can ensure sufficient precision when used, and the accuracy of the accumulated value can reach 0.5 level, which is a relatively accurate flow measurement instrument. However, if the flow of the measured medium is used.
Small, the influence of the leakage error of the meter will be prominent, can not guarantee sufficient measurement accuracy. Therefore, different specifications of the oval gear flowmeter USES minimum flow has a value, only when the actual measured flow is greater than the lower limit value, the measurement precision can be guaranteed.
Secondly, the elliptical gear flowmeter should be used to pay attention to the temperature of the measured medium. Otherwise, it will not only increase the measurement error, but also may cause the tooth to die. For this purpose, the elliptical gear flowmeter is used within the temperature range specified by the meter.
After long term use of the elliptic gear flow meter, the internal gear will be corroded and worn, thus affecting the measurement accuracy. Therefore, it is important to keep an eye on the observation and remove it regularly for inspection, if the conditions permit it to be calibrated periodically.