Description
Product introduction:
Model: SZJ-5
Name: Standard rotation speed generator
Manufacturer: SHANGHAI AUTOMATION INSTRUMENT TACHOMETER AND INSTRUMENT MOTOR CO., LTD.
Application: SZJ-5 standard rotation speed generator
SZJ-4 standard rotation speed generating device is a digital and analog by the amount of intelligent control systems for small DC SR. It is the factory SZJ-3 improved products.
As a third-class standard speed device that increases with speed single closed-loop closure to protect the use of microprocessors for control of the size, weight, cost and control accuracy is better than pure analog closed-loop system for control of the double. In addition to speed control of DC chopper-type regulator, relays switch transfer control to increase the amount of the adjustment of the simulation methods to meet specific user needs school table.
This device sub-controller, drive and transmission of three parts, mainly for verification 0.5 below tachometer and speedometer machinery.
Output speed range: 20 ~ 30000r/min
Motor adjustment range: 200 ~ 3000 r / min Resolution 1 r / min
Transmission transfer ratio: 10 times and 10 times the deceleration in Speed
Output Torque: high speed shaft 0.05N.m
The speed of 0.5 N.m
Low-speed 0.5 N.m
Output speed accuracy: 20 ~ 500 r / min ≤ 0.3%
501 ~ 30000 r / min ≤ 0.1%
To allow continuous use of time: 2h
Use environment: temperature 15 ~ 30 ℃ Relative humidity of not less than 75% of non-corrosive gases.
Power supply: three-phase four-wire AC power, phase voltage 220V 50Hz. Single-phase power supply 220V 50Hz.
Dimensions: Controller 139 × 440 × 360 (mm) high × width × depth
Drive 139 × 440 × 360 (mm) high × width × depth
Transmission 160 × 214 × 480 (mm) high × width × depth
